Microcasting of parts made of metal alloysBAUMEISTER, G; RUPRECHT, R; HAUSSELT, J et al.Microsystem technologies. 2004, Vol 10, Num 3, pp 261-264, issn 0946-7076, 4 p.Article

Two-dimensional, transient model for mass transport in laser surface alloying = Modèle transitoire à deux dimensions pour le transfert de masse dans l'alliage en surface par laserCHANDE, T; MAZUMDER, J.Journal of applied physics. 1985, Vol 57, Num 6, pp 2226-2232, issn 0021-8979Article

Alloying with laser beamLYAKHOVICH, L.S; ISAKOV, S.A; KARTOSHKIN, V.M et al.Metallovedenie i termičeskaâ obrabotka metallov. 1987, Vol 33, Num 3, pp 14-19, issn 0026-0819Article

Microstructure and wear assessment of TIG surface alloying of CP-titanium with siliconADIB HAJBAGHERI, F; KASHANI BOZORG, S. F; AMADEH, A. A et al.Journal of materials science. 2008, Vol 43, Num 17, pp 5720-5727, issn 0022-2461, 8 p.Article

Structural studies of Sn/Pt(100) surfaces : conditions for alloy formationYINGDONG LI; KOEL, B. E.Surface science. 1995, Vol 330, Num 2, pp 193-206, issn 0039-6028Article

Characterization of Mo surface modified Ti by indentation techniquesYONG MA; YING ZHANG; XIAOHONG YAO et al.Surface & coatings technology. 2013, Vol 226, pp 75-81, issn 0257-8972, 7 p.Article

Plasma modification of polypropylene surfaces and its alloying with styrene in situMA, Gui-Qiu; BEN LIU; CHEN LI et al.Applied surface science. 2012, Vol 258, Num 7, pp 2424-2432, issn 0169-4332, 9 p.Article

Alloying-induced surface stress change in Cu(100)c(2×2)-MnHARRISON, M. J; WOODRUFF, D. P; ROBINSON, J et al.Physical review B. Condensed matter and materials physics. 2005, Vol 72, Num 11, pp 113408.1-113408.3, issn 1098-0121Article

Fabrication of Zr and Zr-N surface alloying layers and hardness improvement of Ti―6Al―4V alloy by plasma surface alloying techniqueXIUYAN LI; BIN TANG; JIAORONG YE et al.Applied surface science. 2012, Vol 258, Num 6, pp 1980-1983, issn 0169-4332, 4 p.Conference Paper

Corrosion behavior of laser melted AZ91HP magnesium alloyGAO, Y; WANG, C; YAO, M et al.Materials and corrosion (1995). 2007, Vol 58, Num 6, pp 463-466, issn 0947-5117, 4 p.Article

Surface modification of titanium alloy Ti6Al4V by plasma niobium alloying processZHIYONG HE; ZHENXIA WANG; WENBO WANG et al.Surface & coatings technology. 2007, Vol 201, Num 9-11, pp 5705-5709, issn 0257-8972, 5 p.Conference Paper

The kinetics of formation and structure of an underlayer alloy : the Cu(100)-c(2 x 2)-Pd systemBARNES, C. J; ALSHAMAILEH, E; PITKÄNEN, T et al.Surface science. 2001, Vol 492, Num 1-2, pp 55-66, issn 0039-6028Article

Surface alloying and superstructures of Pb on Cu(100)NAGL, C; PLATZGUMMER, E; HALLER, O et al.Surface science. 1995, Vol 331-333, pp 831-837, issn 0039-6028, aConference Paper

Liquid phase surface alloying of AZ91 D magnesium alloy with Al and Ni powdersREZA ELAHI, Mohammad; HEYDARZADEH SOHI, Mahmoud; SAFAEI, Abdolghayoom et al.Applied surface science. 2012, Vol 258, Num 15, pp 5876-5880, issn 0169-4332, 5 p.Article

Study on bacteria adherence properties of Mo surface-modified layer in Ti₆Al₄V alloy prepared by plasma surface alloying techniqueFAN AILAN; QIN LIN; TIAN LINHAI et al.Applied surface science. 2008, Vol 255, Num 2, pp 419-421, issn 0169-4332, 3 p.Conference Paper

Carbon nanotube reinforced hydroxyapatite composite coatings produced through laser surface alloyingCHEN, Y; ZHANG, Y. Q; ZHANG, T. H et al.Carbon (New York, NY). 2006, Vol 44, Num 1, pp 37-45, issn 0008-6223, 9 p.Article

The surface alloying behavior of martensitic stainless steel cut with wire electrical discharge machineCHING AN HUANG; CHWEN LIN SHIH; KUNG CHENG LI et al.Applied surface science. 2006, Vol 252, Num 8, pp 2915-2926, issn 0169-4332, 12 p.Article

An equational calculus for alloyFRIAS, Marcelo F; LOPEZ POMBO, Carlos G; AGUIRRE, Nazareno M et al.Lecture notes in computer science. 2004, pp 162-175, issn 0302-9743, isbn 3-540-23841-7, 14 p.Conference Paper

Tribologische Eigenschaften laser-strahllegierter und -beschichteter Magnesiumlegierungen = Tribological characteristics of laser beam-alloyed and -coated magnesium alloysGALUN, R; KUTSCHERA, U; WEISHEIT, A et al.Metall (Berlin, West). 1999, Vol 53, Num 12, pp 672-675, issn 0026-0746Article

Energetics of ternary and quaternary alloy surfacesBOZZOLO, G; FERRANTE, J; NOEBE, R. D et al.Surface science. 1997, Vol 377-79, pp 1028-1032, issn 0039-6028Conference Paper

La boruration superficielle du fer par faisceau laser = Laser beam surface boronizing of ironPONS, M; CAILLET, M; GALERIE, A et al.Matériaux et techniques. 1985, Vol 73, Num 12, pp 699-708, issn 0032-6895Article

Improved oxidation resistance of the Zr-alloyed layer formed on 420 stainless steel by plasma surface alloyingLIU, X. P; YOU, K; CHEN, K et al.Surface & coatings technology. 2013, Vol 228, issn 0257-8972, S241-S245, SUP1Conference Paper

Liquid phase surface alloying of CP-titanium with aluminum in an atmosphere of argon and nitrogenVAZIRI, Ardavan; HEYDARZADEH SOHI, Mahmoud; SAFAEI, Abdolghayoom et al.Surface & coatings technology. 2012, Vol 206, Num 18, pp 3788-3794, issn 0257-8972, 7 p.Article

Characterization and corrosion study of NiTi laser surface alloyed with Nb or CoNG, K. W; MAN, H. C; YUE, T. M et al.Applied surface science. 2011, Vol 257, Num 8, pp 3269-3274, issn 0169-4332, 6 p.Article

Solid-state alloying in nanostructured binary systems with positive heat of mixingMA, E; SHENG, H. W; HE, J. H et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2000, Vol 286, Num 1, pp 48-57, issn 0921-5093Conference Paper